True IPL – Intense Pulsed Light Technology
A GOOD VARIETY OF CUT-OFF FILTERS
SOLARI is equipped with easy to use cut-off filters that minimize and reduce treatment time associated with having to change handpieces. Six different cut-off filters are available to maximize treatment outcomes.
Whereas in most other conventional IPLs the spectral distribution is less efficient in the target tissue due to the lower amount of the chromophore-specific wavelength, SOLARI’s spectral distribution is much more efficient in the target tissue, since SOLARI™ delivers more light energy at those precise wavelengths associated with the target chromophores.
The sharp cut-off in the example of the spectral distribution of the 570 nm SOLARI™ filter seen on the right indicates high selectivity for the target chromophores at the selected wavelength.
The cut-off filter of the competitor’s system on the other hand gives a much less sharp wavelength distribution, with less selectivity for the target chromophore. In this case, the user needs to increase the fluence to achieve the desired clinical effect in the wavelength-specific target. This approach will likely induce side-effects as it will also increase the energy of the other undesirable wavelengths beyond the ideal cut-off point.
TIME RESOLVED SPECTRAL DISTRIBUTION
SOLARI’s time resolved spectral distribution delivers an even distribution of the spectrum for each micro pulse over time as illustrated in the right-hand panel, whereas in other IPL systems the spectral distribution of each micro pulse fluctuates noticeably. This will increase the possibility of creating side effects due to the highly variable amount of spectral fluctuation during short millisecond pulses. However, clinicians can expect a predictable treatment outcome with SOLARI™ as the system delivers a very stable spectral output per pulse over time.
Lutronic’s Simmer Mode Technology drives the SOLARI™ flashlamp evenly to produce a very stable, flat and homogeneous spectral output over the entire pulse, as seen in the illustration in the right-hand panel: this is SOLARI’s true square pulse technology. With this square pulses, the clinician can get homogeneous delivery of light across the treated area with no hot spots, thereby helping prevent unwanted side effects.
- vascular lesions
- enlarged pores
- Skin rejuvenation
- Epidermal pigmented lesions
- Dermal pigmented lesions
- Permanent hair removal
- Lentigo solaris
1.Pigmented lesions (Courtesy of GS Lee, M.D., South Korea)
2nd and 3rd Lentigines (Courtesy of S. Haw, M.D., South Korea)
4. Telangiectasias (Courtesy of GS Lee, M.D., South Korea)
5. Active acne (Courtesy of GS Lee, M.D., South Korea)
6.Light aging (courtesy of GS Lee, M.D., South Korea)
*Results my vary
|Spot Size||12 x 40 mm (4.8 cm’)|
|Max. Fluence||35 J/cm’|
|Repetition Rate||Upto 1 Hz|
|Pulse Shape(in Time)||Square Pulse|
|Pulse Width||2 ms~ 300 ms|
|Impulsform (Zeit)||Sapphire Contact Cooling|
|Wavelength(Dual Filter System)||420 ~ 750 nm, 510 ~ 950 nm, 570 ~ 950 nm|
|Wavelength(Dual Filter System)||620 ~ 950 nm, 670 ~ 950 nm, 71 O ~ 950 nm|
|Dimensions(mm)||570(D) x 367(W) x 1027(H)|
|Input Power||AC 220V/22A (4 ‘(;NJ|
PASSION FOR Innovation
With special attention to the needs of users and patients, Lutronic invests a lot of time and money in the development of devices for the highest standard and continuous improvement. The products and services developed by us should not only meet, but exceed, your expectations and those of patients. For this reason, we developed our SOLARI™ according to these four principles: