ECO2 - CO2 Laser for ablative skin rejuvenation - Lutronic Aesthetic Lasers, visual and surgical lasers

eCO2 Plus™

Dual Mode CO2 Resurfacing Laser

  • Low risk, high safety, rapid recovery and low downtime
  • Controlled Chaos Technology creates pseudo-random microwound
    patterns to minimize heat build-up and maximize patient comfort
  • No consumables reduces operating cost and improves ROI

Transform Your Practice

The Lutronic eCO2 Plus™ is the leading fractional and ablative laser that offers you the full spectrum of treatments in your practice. The eCO2 Plus works with the patented Controlled Chaos Technology (CCT™), an algorithm that delivers each micro-laser beam pseudo-randomly so that there is a maximum distance between the successive beams. This enables the tissue to dissipate the greatest possible amount of heat between the shots. As a result, this means increased safety, fewer post-operative discomfort and a faster healing process with unparalleled results.



eCO2 Plus includes the 0.2 mm-1.0 mm zoom handpiece for incisional & excisional surgical procedures to fully ablative skin resurfacing needs.

Zoom Handpiece Eco2


With the ability to control your thermal damage, you can further adjust and customize treatments to your patient’s needs.


Eco2 Hp
Eco2 Hp – Lutronic Aesthetic Lasers, visual and surgical lasers
Pulse Energy 2mJ ~ 240mJ
Frequency (Dynamic Mode) 10Hz ~ 200Hz
Density (Static Mode) 25 ~ 400 spots/cm2
Radiation Scan Area Max 18 x 18mm


Two optional incisional handpieces are also available: F100 Handpiece, F50 Handpiece:

Eco2 Plus F100 F50 Handpiece


User Mode Char Free / Super Pulse / CW
Pulse Rate 1 Hz – 700 Hz  / 1 Hz – 550 Hz Super Pulse
Pulse Width 40 μs – 1,000 μs  / 1 ms – 5 ms Super Pulse


Dynamic Mode Illustration


Dynamic Mode completely eliminates the checkerboard look of other CO2 systems and provides clinicians with a more comfortable operation by allowing the user to ‘Air Brush’  the energy. Whether you are treating large areas or just feathering to eliminate demarcation lines, Dynamic Mode provides your patients with a more natural look.

Static Mode Illustration


Static Mode allows for traditional ‘Stamping’ which allows users to treat scanned areas of 18 x 18 mm with selectable density options to enable precise delivery of laser energy without the need for multiple passes other systems require.


From ultra-deep to superficial ablation, the eCO2 Plus has the features you need to address a broad range of clinical conditions. The ultra-fast quick change tips come in a choice of three spot sizes, 120 and 300 μm, allowing you on-the-fly customized treatments. The eCo2 Plus’s tip auto-recognition feature automatically changes treatment settings to adjust for the change in spot size. Combined together, the advanced technology, quick-change tips and safety features ensure the ultimate control for the best outcomes.

Ebene 1 Kopie 2
120 µm Spot Size
Ebene 1 Kopie
300 µm Spot Size

Ebene 1
500 µm Spot Size


Eco2 Human Histology

The eCO2 Plus is applicable for many indications using by a trained physician for procedures requiring the ablation, vaporization, excision, incision and coagulation of soft tissue. This system can be applied for any of the following indications.

  • Scars
  • Warts
  • Snoring
  • Hemorrhoids
  • Stress urinary incontinence
  • Oral lichen planus




1. Courtesy of Jeffery A. Rapaport, MD

*Results my vary

Laser wavelength 10.6μm
Medium of Transmission Sealed off RF Module Laser
Laser transfer method Articulated arm with Handpiece
Scanner Aiming Beam 637nm
CO2 RF Module Maximum power 30 Watt at Continuous Wave
Laser class CLASS IV
User Interface Touch LCD type, 7” LCD
Dimensions 360mm (W) x 450mm (L) x 1,870mm (H)
Weight (excluding the arm) 48kg
Cooling method Air cooling
Electrical rating Single phase AC100-120V or AC220-230V,
(FUSE 250VAC/6.3A or 125/12A), 50/60Hz,
Power consumption: 800VA
Eco2 Plus Normal Handpiece Image

eCO2 Plus includes the 0.2 mm-1.0 mm zoom handpiece for incisional & excisional surgical procedures needs

Cct Illustration

Patented Controlled Chaos Technology (CCT™) generates random energy delivery patterns to minimize complications from bulk heating and maximize patient comfort.

Behanldung Eco2

The Controlled Chaos Technology (CCT™) allows the fabric to dissipate the heat from the shot to the maximum. This means increased safety, less post-operative complaints, and a faster healing process for the patient.

PASSION FOR  Innovation

With special attention to the needs of users and patients, Lutronic invests a lot of time and money in the development of devices for the highest standard and continuous improvement. The products and services developed by us should not only meet, but exceed, your expectations and those of patients. For this reason, we developed our eCO2 Plus™ according to these four principles:

Ebene 3


Patented Controlled Chaos Technology (CCT™) generates random energy delivery patterns to minimize complications from bulk heating and maximize patient comfort.

Ebene 2


Users can easily and intuitively balance results and safety by delivering ablative energy at the desired density and depth. Easily adjust treatment parameters through intuitive and user-friendly interface.

Ebene 5


No consumables reduces operating cost and improves ROI. Patients are attracted to low risk, minimal downtime treatments.

Ebene 4


The eCO2 Plus sets itself apart from the competition with ultra deep ablation depths. eCO2 Plus is proven to deliver up to 2.4 mm of ablation depth. Two energy delivery modes (dynamic and static) further increase versatility and control over outcomes.

Scroll to top